0870 7070110
+44 (0)7903 585048
email: tim @ actproducts.co.uk
ACT Induction Components
The ACT induction performance components offer improved engine breathing and torque, responsiveness and each installation responds differently to each engine. Outlined below are the products, pricing and general benefits.
Induction TVR
| Product Code | Individual Induction Hoses | Price + VAT | ||
|---|---|---|---|---|
| TI001 | Plenum to AFM hose | See shop | ||
| TI002 | AFM to Filter hose TVR Griffith early | See shop | ||
| TI003 | AFM to Filter TVR Griffith from 95 | See shop | ||
| TI004 | AFM to front bulkhead Chimaera | See shop | ||
| TI005 | bulkhead to filter Chimaera | See shop | ||
| TI006 | Early Griffith kit cylinder filter hoses only with stainless clips, K&N & heat sleeve | See shop | ||
| TI006A | Griffith kit as above but without filter | See shop | ||
| TI007 | Later Griffith kit inc K&N and heat sleeve | See shop | ||
| TI007A | Later Griffith kit, as above but without k&N filter | See shop | ||
| TI008 | Chimaera kit inc clips K&N & heat sleeve | See shop | ||
| TI008A | Chimaera kit as above but without k&N filter | See shop | ||
| TI009 | Silicone elbow TVR Wedge | See shop | ||
| TI010 | K&N filter TVR Chimaera/Griff/V8S | See shop | ||
| TI011 | K&N filter TVR Wedge V8 | See shop | ||
| TI012 | K&N filter TVR Griffith 500/ TVR Cerbera | See shop | ||
| TI013 | Pipercross panel filter for TVR Griffith 500 | See shop | ||
| TI014 | Pipercross panel filter for TVR speed 6 | See shop | ||
| TI015 | Pipercross filter for Chimaera / Early Griffith | See shop | ||
| TI016 | Mikalor stainless hose clips 70-90mm | See shop | ||
Induction components
| Product Code | Trumpet Sets | Price+VAT | ||
|---|---|---|---|---|
| TI020 | 45mm alloy | See shop | ||
| TI021 | 44mm carbon fibre TVR 5.l | See shop | ||
| TI022 | 38mm carbon fibre superflare TVR 4.0-4.5 | See shop | ||
| TI023 | 45mm Carbon superflare | See shop | ||
| TI024 | Alloy modified to 71mm | See shop | ||
| TI025 | Alloy modified to 73mm | See shop | ||
| TI026 | Carbon Fibre plenum case without throttle | See shop | ||
| TI027 | Carbon Fibre plenum with single 65mm Rover throttle (exch) | See shop | ||
| TI028 | Carbon Fibre plenum with single 71mm throttle | See shop | ||
| TI030 | Twin throttle plenum kit inc airbox, with adapter plate to fit existing trumpet base | See shop | ||
| TI031 | Twin throttle plenum kit inc airbox and new trumpet base | See shop | ||
| TI033 | Triple throttle plenum kit inc airbox and new trumpet base | See shop | ||
- All prices are subject to VAT at the going rate.
- All products, unless otherwise specified, are manufactured and designed by ACT in materials such as Carbon Fibre offering reduced heat conductivity and reduced weight.
- Products are supplied on an exchange basis.
- Fitting service available.
- All prices are retail, displayed in UK Pounds sterling and are ex works.
- National and international delivery available.
Disclaimer:
The products are designed and tested on TVR Rover V8 engined sports cars and can provide the engine characteristic benefits as described on these pages. Please understand that all engines run and perform differently and the application of the components described on these pages is undertaken at the owners risk. ACT recommend that experienced engineers fit our products and it is the responsibility of the owner to notify motor insurance companies where applicable.
© ACT Induction performance components
Call ACT now on 0870 7070110 or +44 (0)7903 585048 email: tim @ actproducts.co.uk